feedrollers.com home> Feedroller101

Feed Rollers 101

Feedrollers.com recognizes the importance of having the right feed roller for the job. That's why we offer the industry's largest selection of feed roller options. Whether it's steel, bonded or replaceable urethane rollers: we've got the solutions you need !

The feed system is integrally related to a moulder's, planer's or stock feeder's performance and resulting surface quality. Wood that is fed smoothly and evenly will improve finished product. Wood cannot properly be fed with feed rollers that slip or jam.

Steel feed rollers are available in a variety of tooth configurations, depending on the application. Most steel rollers can be resharpened to extend their life and enhance their performance.

We specialize in sharpening worn steel rollers. We also offer hardening and hard chroming services for even more improved service. feedrollers.com can also custom fabricate special rollers to your specifications.

Urethane rollers are used where scant materials are used, or marring is an issue. Rollers can either be bonded to a hub, or replaced on a reusable hub system. Durometers of urethane tires represent the hardness of the material. 60 is soft and 90 is hard. Urethane is color coded for easier identification. Softer rollers provide better traction, but will wear out quicker.

Here are some guidelines:

  • Moulders/planers (Thru-Feed) 80 or 85 durometer
  • Moulders/planers (Push-Feed) 85 or 90 durometer
  • Power Stock feeders (Rough stock) 70 durometer
  • Power Stock feeders (Smooth stock) 50 durometer


  1. Feed pressure of 30-50 PSI is recommended by most machine manufacturers. Use only the pressure needed. More pressure is not always better!
  2. Proper machine alignment requires less pressure to feed the wood
  3. Steel rollers, like cutting tools, need to be sharp in order to do
    their job.
  4. Resharpened steel rollers must be ground to the same diameter to feed properly. This also alleviates wear-and-tear on the gear box drive. Equate that to the damage to your drive train from running different size tires on your car!




To reach a friendly voice, call 1-800-TOOLING (866-5464)
during our hours of operation:
Monday through Friday, 9 a.m. to 6 p.m. EST
(Eastern Standard Time)

www.feedrollers.com, is a Division of Wood Tech Enterprises, Inc. see our parent website below:

Wood Tech Enterprises
Our website: www.woodtechtooling.com

P.O. Box 2226
Fairview, NC 28730 USA

1-800-TOOLING (866-5464)
Phone: 828-628-4414
Fax: 828-628-4490

Shipping Address:
19 Khristy Scott Lane
Fairview, NC 28730 USA

Copyright © 1998-2012 Wood Tech Enterprises, Inc. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Wood Tech is not responsible for typographical errors. Prices are subject to change. All prices are in U.S. Dollars.