DRIVE HUBS & REPLACEMENT TIRES FOR MOULDERS
>Reuseable Hubs
The precision machined steel moulder hubs are built to last. Hubs are flush sided for stacking. Special application hubs are available on request. To see how the Feedworks Roller System works - click here.
Product Number |
Bore |
Key |
Width |
Machine |
Price |
H-110S (2") |
30mm |
10mm |
2" |
SCMI P64, P75, Compact 22, 23 & 23S, Sintex |
CALL |
H-110S (3/4") |
30mm |
10mm |
3/4" |
SCMI P64, P75, Compact 22, 23 & 23S, Sintex |
CALL |
H-3 |
3" |
3/8" |
2" |
Diehl & others |
CALL |
H-4 |
1 5/8" |
3/8" |
2" |
Mattison & others |
CALL |
H-5S* |
35mm |
10mm |
2" |
Weinig, SCMI (Superset 23, Logic 23, P18, P22, P170, P230) & others with set screw |
CALL |
H-6S* |
35mm |
10mm |
3/4" |
Weinig & SCMI (Superset 23, Logic 23, P18, P22, P170, P230) & Wadkin Shaft |
CALL |
H-6-WG |
30mm |
none |
3/4" |
Weinig -three bolt hole |
CALL |
H-6-WK |
25mm |
none |
3/4" |
Wadkin Flange Mount |
CALL |
H-6-SCMI |
30mm |
3/4" |
SCMI Bolton |
CALL |
|
H-7 |
35mm |
10mm |
3/4" |
Weinig & IIDA |
CALL |
H-8-WG |
30mm |
none |
2" |
Weinig -three bolt |
CALL |
H-8-WK |
25mm |
none |
2" |
Wadkin Flange Mount |
CALL |
H-8-SCMI |
30mm |
2" |
SCMI Bolton |
CALL |
|
| *Keystock M8 x 10mm for SCMI Machines: 2" long - CALL & 3/4" long - CALL | |||||
Replacement tires are available in a number of sizes, hardness. Durometers and are color coded for easy identification. Orange tire denotes 80 Durometer, Green tire denotes 85 Durometer and Red tire denotes 90 Durometer. The higher the number, the harder the tire. (Specify Durometer when ordering or call for technical assistance.) Bevels are available.
| Hardness Chart | |
| Durometer | Color |
| 50 | Dark Green |
| 60 | Dark Blue |
| 70 | Yellow |
| 80 | Orange |
| 85 | Kelly Green |
| 90 | Red |
The higher the number—the harder the tire. Softer tires grip better but wear out faster, just like high performance car tires. 50,60, and 70 Durometer tires are normally used in Power stock feeder applications. 80 and 85 Durometer tires are used on Thru-feed moulders. 90 Duro's are typically used on push feed rollers. For more info: call 1-800-TOOLING. |
|
Product Number |
Width |
Outside Diameter |
Price |
T-110-120 (2") |
2" |
120mm (4 3/4") |
CALL |
T-110-120 (3/4") |
3/4" |
120mm (4 3/4") |
CALL |
T-3-206 |
2" |
206mm (8-1/8") |
CALL |
T-4-160 |
2" |
160mm (6-5/16") |
CALL |
T-4-170 |
2" |
170mm (6-11/16") |
CALL |
T-4-184 |
2" |
184mm (7-1/4") |
CALL |
T-5-140 |
2" |
140mm (5-1/2") |
CALL |
T-6-140 |
3/4" |
140mm (5-1/2") |
CALL |
T-7-170 |
3/4" |
170mm (6-11/16") |
CALL |
T-8-140 |
2" |
140mm (5-1/2") |
CALL |
| Assemblies are flush sided for stacking. All sizes shipped from inventory. Bevels available. | |||
Product Number |
Diameter |
Machine |
Price |
HDRoller |
80mm x 20mm |
Weinig, Wadkin & SCMI* |
CALL |
| *Needs Reducing Bushing - CALL | |||
©2001-2021 - WADKIN NORTH AMERICA,
c/o Advanced Machinery Services Ltd
Skeffington Mill, Uppingham Road
Skeffington, UK LE7 9YE